Product availability
| Items | Single reduce (SR) | Double reduce (DR) | ||||||
| Cutting board | Steel coil | Cutting board | Steel coil | |||||
| To be negotiation | General manufacturing range | To be negotiation | General manufacturing range | To be negotiation | General manufacturing range | To be negotiation | General manufacturing range | |
|
Thickness |
0.15-0.60 | 0.17-0.60 | 0.15-0.60 | 0.17-0.60 | 0.12-0.36 | 0.14-0.25 | 0.12-0.36 | 0.14-0.25 |
|
Width |
600-1100 | 650-1050 | 600-1100 | 650-1050 | 600-1100 | 650-1050 | 600-1100 | 650-1050 |
| Length (mm) |
457-1110 | 457-1050 | ---- | ---- | 457-1110 | 457-1050 | ---- | ---- |
| Weight (ton) |
Max.2 | Max.2 | 2-15 | 2-8 | Max.2 | Max.2 | 2-15 | 2-8 |
| Height (mm) |
Max.540 | Max.540 | ---- | ---- | Max.540 | Max.540 | ---- | ---- |
| Inside diameter (mm) |
---- | ---- | 419/508 | 419/508 | ---- | ---- | 419/508 | 419/508 |
| Outer diameter (mm) |
---- | ---- | Max.1930 | Max.1930 | ---- | ---- | Max.1930 | Max.1930 |
| Tin plating amount | 1.1 /11、2.0/2 0、2.8/2.8、5.6/5.6、8.4/8.4、11.2/11.2 1.1/2.8、 2.5/5.6、2.8/8.4、2.8/11.2、5.6/8.4、5.6/11.2、8.4/11.2、(Special specifications can be negotiated separately) |
|||||||
| Tempering degree | T1、T1 5、T2, T2 5、T3、T3.5、T4、T5 | DR7M、DR8、DR8M、DR9、DR9M、DR10 | ||||||
| Annealing the way |
BA*2 | CA | ||||||
| Surface | BE、B、R1、R2、M、S1、SA | R1、 R2、 S1 | ||||||
| Passivation mode | #311、 #300、 #71 | |||||||
| Oiling | DOS | |||||||
| Soft melting | Reflow, no reflow. (If it is not specified, it is usually treated by reflow) | |||||||
Note:
*1: If you exceed the general range, you need to consult in advance.
*2: BA material (T1, T1.5, T2, T2.5, T3): It is recommended to use ultra-low carbon continuous annealing steel (IF steel) which has the same characteristics as BA material and has better comprehensive performance.
